High pressure steel wire braided hose is a hydraulic conveying pipeline with high pressure resistance and good wear resistance characteristics, usually composed of an inner tube, a steel wire braided layer, and an outer sheath. Its specifications and models are mainly distinguished based on parameters such as inner diameter, wall thickness, and pressure resistance. The following are some common specifications and models of high-pressure steel wire braided rubber hoses:

3/16 inches to 2 inches (inner diameter 4.8mm to 50.8mm), wall thickness 1.5mm to 4.5mm, pressure resistance 210bar to 600bar.

1/4 inch to 1 inch (inner diameter 6.4mm-25.4mm), wall thickness 3.5mm to 5.0mm, pressure resistance 400bar to 700bar.

5/16 inches to 2 inches (inner diameter 8mm to 50.8mm), wall thickness 3.5mm to 5.0mm, pressure resistance 350bar to 840bar.

1/4 inch to 2 inches (inner diameter 6.4mm-50.8mm), wall thickness 3.5mm to 5.0mm, pressure resistance 420bar to 840bar.

3/16 inch to 1 inch (inner diameter 4.8mm to 25.4mm), wall thickness 3.5mm to 5.0mm, pressure resistance 400bar to 840bar.

It should be noted that the specifications and models of high-pressure steel wire braided rubber hoses produced by different manufacturers may vary. The specific selection should be based on the actual usage scenario and requirements to ensure the selection of appropriate specifications and models to meet the requirements. Meanwhile, to ensure safety and reliability, it is recommended to choose products with certification standards and follow relevant installation and usage specifications. At the same time, we can also customize according to the needs of our customers. Our rubber hose production experts at Zaozhuang Jinflex Rubber&Plastic Technology Co., Ltd.